Russound CAV6.6 Six-Zone Installation Menu Overview, UNO-S1 UNO-S2, Button Function

INSTALLER

INSTALLATION MENU OVERVIEW

There are three item types in the installation menu:

Menu –	“Folder” that holds procedures and/or feature options.
Procedure –	A series of steps to perform a guided operation, such as configuring a button.
Feature –	The actual settings that will change the system configuration.

The following UNO-S1and UNO-S2buttons are used to navigate and make selections while using the installation menus. The UNO-TS2 does not support access to the Installation Menu.

UNO-S1 UNO-S2

Button Function

Setup button (located under cover plate on the keypad’s right side) - Press and release while in normal operating mode to enter the Installation Menu. Press to back out of any procedure and return to beginning of Installation Menu, then to normal operating mode.

Adjust feature setting (increment)

Adjust feature setting (decrement)

Go to next menu / procedure / feature. Not available while performing a pro- cedure

Go to previous menu / procedure / feature. Not available while performing a procedure

Enter menu / begin procedure / show current feature setting. While perform-

ing a procedure, it is also used to advance to the next sequential feature setting once the current feature has been viewed or adjusted.

UNO-S1 Keypad Five-character Display

The UNO-S1 keypad abbreviates information as necessary to appear in its five-character display. In the following menu procedures, the UNO-S1 five-character abbreviation is shown in parentheses underneath the 12-character version.

49