Russound CAV6.6 UNO-S1 Keypad Button Functions, Scrolls through the six audio source inputs

USER

OPERATION

UNO-S1 Keypad Button Functions

The UNO-S1 keypad operates in a similar manner as the UNO-S2 keypad.

Room On/Off

Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAV6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected,

etc. Press and release to turn off the UNO System Keypad. This will also put the corresponding CAV6.6’s room into a standby state.

System All On/Off

An “All On” command is issued by pressing and holding for 3 seconds, after an initial room has been turned on. An “All Off” command can be issued to all rooms by pressing and holding after the room has been turned off.

System On Indicator

When the room is off, but the system is on in

another room, is illuminated by a green backlight and the "SYS ON" icon remains visible.

Source Select Button

scrolls through the six audio source inputs.

To change sources, press and release . As the sources are sequentially selected, each source's name appears on the keypad LCD

panel. When a source is selected in more than one room, the “SHARED” icon will appear on all

UNO Keypads using that source. is also

used to enter the User Menu with a press and hold action. (See next page for User Menu)

Volume Up/Down Buttons

The room’s audio output is adjusted using .

Command Keys

The command keys allow control of the selected source at the UNO Keypad. The command keys are activated with a press and release, or press and hold to access secondary functions.

14