Russound CAV6.6 Six-Zone instruction manual Programming Center Keypad Port Connection

INSTALLER

MAKING CONNECTIONS

Programming Center Keypad Port Connection

The CAV6.6 can be programmed via keypad connection using CAT-5 and the T568A RJ-45 wire configuration. An UNO-S2 Keypad can be attached to the controller at the Programming Center Keypad Port Connection.

The Programming Center Keypad Port is designed for use in local programming, specifi-

cally for learning IR commands directly into the IR receiver on the controller’s front panel. (see Learn IR flow chart on page 70).

The CAV6.6 can also be programmed from any UNO-S2 keypad connected to its keypad ports.

42