Russound CAV6.6 Six-Zone Home Theater, Source Loop Outputs, Front Left and Right Speakers

SAMPLE SYSTEM CONFIGURATION 6

Home Theater

Home Theater systems can share sources with a CAV6.6 Controller to provide additional listen- ing and viewing options. In this configuration, the Home Theater Receiver provides a 12VDC signal to the CAV6.6 at the Home Theater 12VDC In Port. The 12VDC signal tells the con- troller to leave any shared home theater source equipment powered when all CAV6.6 zones are off, temporarily bypassing the source power management feature. The 12VDC connected to the CAV6.6’s Home Theater trigger allows the source equipment to be left on.

Source Components

In this configuration, three audio source compo- nents are used of a possible six audio/video source inputs. The source components are con- nected using quality RCA cables to the first three inputs.

Source Loop Outputs

The Source Loop Outputs are connected to the CAV6.6 and to the Home Theater Receiver source inputs using RCA cables. This enables the source equipment to be shared between the two components.

Components List:

1 - CAV6.6 Controller

3 - UNO-S2 Keypads

1 - SRM-2.1 Speaker Relay Module

1 - pair Advantage Iso-Mount Speakers

1 - 846C 12VDC Power Supply

3 - 845.1 Micro Emitters

Keypads

Three UNO-S2 Keypads are connected to the CAV6.6 Controller using the CAT-5 T568A RJ-45 wiring configuration. This gives complete control of each of the three zones to the corresponding UNO-S2 Keypad.

Front Left and Right Speakers

Zone 1 uses the same pair of speakers as the Home Theater front main left and right speak- ers. The amplified output from zone 1 connects to the input on the back of the SRM-2.1 speaker relay module. The Home Theater left and right front main speaker outputs are connected to the input on the front of the SRM-2.1. Zone 1 12V Trigger output is connected to the 12V +/- on the back of the SRM-2.1. When zone 1 is pow- ered on, the SRM-2.1 is triggered allowing audio from zone 1 of the CAV6.6 to power the speak- ers. When the UNO System Keypad for zone 1 is shut off, 12VDC is no longer provided to the SRM-2.1, and the output of the SRM-2.1 is switched to the Home Theater front left and right amplified speaker output.

90