RS-232 Interface | Russound CAV6.6 Six-Zone instruction

The CAV6.6 supports RS-232 communication with various third-party automation systems through the RS-232 ports. These ports are also used for firmware updates, and for controller programming through the PC Power Tool soft- ware program.

The two RS-232 com ports are located on the front and the back of the CAV6.6 and use a DB-9 cable connection. Before performing

INSTALLER

MAKING CONNECTIONS

RS-232 Interface

updates or programming, select a front or rear RS-232 port and set the Front/Rear RS-232 switch on the front of the controller as well. The switch is located next to the DB-9 port.

For RS-232 protocol, available firmware updates and the RNET Backup Utility, see the Document Center at www.russound.com. Look for the Technical Documents under RNET Systems.

41

Image 41

Russound CAV6.6 Six-Zone instruction manual RS-232 Interface

Contents

CAV6.6 Important Safeguards Table of Contents Reference Section Favorites Party ModeDo Not Disturb Front Aux A/V CAV6.6 Controller-Front Panel Component Guide Front A/V AUX Connections UNO-S2 Keypad Command Keys UNO-TS2 Touchscreen UNO-S1 Keypad 102.5 SRC2 Remote Control UNO-S2 Keypad Button Functions Operation Feature and Setting 1. Bass UNO-S2 User Menu Setting PreferencesTreble Balance Scrolls through the six audio source inputs UNO-S1 Keypad Button Functions Party Party Mode Master or Off UNO-S1 User Menu Setting PreferencesFeature and Setting FrtAV Front A/V Aux In Enabled/Disabled Source Control Screens UNO-TS2 Touchscreen Button Functions UNO-TS2 Setting Preferences User Menu Settings Getting Started Tools needed for installationUnpacking the Components Connection Tips Component Guide CAV6.6 Controller-Rear Panel Installer OS Update Port UNO Keypad-OS Update PortUNO-S2 Keypad UNO-S1 Keypad UNO-TS2 UNO Keypads-Rear PanelUNO-S2 UNO-S1 Keypad Wiring Wiring InstructionsCAT-5 Wire Color Speaker Wiring Jumper Setting UNO-S2 KEYPAD-INSTALLATIONUNO-S2 Keypad Connections CAT-5 Connection IR Receiver Connection Keypad Location Keypad Installation UNO System Keypad Port Connection See Sample System Configuration 3, Source IR Connections Source Audio/Video Input Connections Source Audio/Video Loop Output Connections Speaker Connections ACC IR Connection Zone Audio to Amp and Video Outputs BUS Ready Sub-zone Connection 12VDC 50mA Trigger Out 12VDC Trigger In/Out12VDC Home Theater Trigger Audio/Video 12VDC Page Trigger12VDC Page Trigger Out Installer Zone 12VDC Trigger Outputs Rnet Link In and Link Out Multiple Controllers SMS3 Rnet Link In and Link Out RNET-enabled Components RS-232 Interface Programming Center Keypad Port Connection Initial Install Test System Programming Overview Programming System Programming Overview cont’d Source Information Form Zone Information Form Macro Editor Form UNO-S1 UNO-S2 Installation Menu OverviewButton Function UNO-S1 Keypad Five-character Display Command Type Installation MenuSource NUM Source Name Basic Setup cont’d To build macros, see Macro Editor Key Config cont’d Prefix CMD Trim LevelNumeric Text Numeric IR cont’d Selected DefaultSelected Macro To build macros, see Macro Editor KEY Function Macro SRC SEL CMD SrcSC Syson Enable Source Select Command cont’dParty Enable Master Enable Enable Zone Setup cont’dVolume Controller ID CtlId Factory Init FInit Power on CMD OnCmd Power Management cont’dSense Delay Learn IR LrnIR Power OFF CMD OfCmd Learned SRC Learn IR cont’dLEARN/DELETE Test IR? #CONTROLLERS Macro Editor cont’dBuild Time Build Date Source Setup Basic Setup Setup Menu Flow Charts Source Setup Key Configuration Source Setup Source Names/Volume Trim Source Setup Numeric IR Source Setup Source Select Command/# of Sources Zone Setup Controller Setup Power Management Learn IR Macro Editor System Info UNO Keypad Diagnostics Menu Device Codes for Cable Device Codes for TVs Device Codes for Video Acc Device Codes for Cable cont’dDevice Codes for SAT/DSS Device Codes for VCRs Device Codes for Laser Disc Players Device Codes for VCRs cont’dDevice Codes for DVD Players Device Codes for Tuner/Amp Device Codes for Home Control Device Codes for Amp and Misc. AudioDevice Codes for CD Players UNO-S1 UNO-S2 Source Names Tivo Six Zones and Six Sources Sample System Configuration Rnet Link In and Link Out Integrate Multiple CAV6.6’s Sample System Configuration Zone Keypad Expansion Sample System Configuration BUS Ready Sub-Zone Addition Multi-Source Mode SwitchBUS Hub CAT-5 Connections ZONE, 1-SOURCE Zone Audio To Amp & Video Outputs Additional Amplification Sample System Configuration Front Left and Right Speakers Home TheaterSource Loop Outputs Sample System Configuration KEY Function UNO-S1 TV Hdtv KEY Codes TV Hdtv SAP SAP, CC KEY Function UNO-S1 Cable KEY Codes Cable SAP KEY Function UNO-S1 Video ACC KEY Codes Video ACC Language, MTS KEY Function UNO-S1 SAT/DSS KEY Codes SAT/DSS Alt/Audio,Lang.,CC KEY Function UNO-S1 VCR KEY Codes VCR Menu Back Clear Fav Channel FavCh KEY Function UNO-S1 Laser Disc KEY Codes Laser Disc Subtitle, CC KEY Function UNO-S1 DVD KEY Codes DVD 105 KEY Function UNO-S1 Receiver KEY Codes Receiver DVD, LD KEY Function UNO-S1 AMP/MISC Audio KEY Codes AMP/MISC Audio TAPE, MD KEY Function UNO-S1 KEY Codes CD Input Tape, MD KEY Function UNO-S1 Home Control KEY Codes Home Control Input Source/Scene CAV6.6 Controller/Amplifier Technical Specification Warranty & Repair Rev 05/10/06