INSTALLER

INSTALLATION MENU

The following items make up the Installation Menu:

SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu)

POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo)

SOURCE SETUP (SrcSu)

Source Setup allows the system’s sources to be configured.

The following items can be found in the SOURCE SETUP menu:

BASIC SETUP (BasSu) KEY CONFIG (KeyCf) SOURCE NAMES (SrcNm) SRC VOL TRIM (SrcVT) NUMERIC IR (NumIR) SRC SEL CMD (SrcSC)

# OF SOURCES (#Srcs)

BASIC SETUP (BasSu)

NOTE: The BASIC SETUP procedure should be performed for each source before proceeding to other source setting changes.

This procedure uses built-in source “templates” to quickly and easily configure the source settings needed for basic operation of the source component. Before performing BASIC SETUP, connect the source components to the CAV 6.6 as outlined in the Source Connections section. Also be sure that all sources are powered on. See Basic Setup - Flow Chart on page 62

1.

SOURCE NUM –

Select the source to be configured.

 

(Src #)

 

2.

SOURCE NAME –

Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.).

 

(Name)

 

3.

COMMAND TYPE –

Select the type of command template (e.g., CD, TV, etc.). Selecting

 

(CmdTp)

the command type template will tell the CAV 6.6 how to configure the

 

 

key’s command and text for the source component.

 

a. Selected: Learned IR

Choose Learned IR if the pre-programmed IR code library does

 

(LrnIR)

not support the source component.

 

i. LEARNED SRC –

Select the learned source bank to be assigned to the source

 

(LnSrc)

component. (See Learning IR procedure for instructions on how

 

 

to learn IR codes.)

50

Page 49 Page 51
Page 50
Image 50
Russound CAV6.6 Six-Zone instruction manual Installation Menu, Source NUM, Source Name, Command Type
Page 49 Page 51
Top Page Image Contents