Russound CAV6.6 Six-Zone Source Audio/Video Input Connections, Source IR Connections

The CAV6.6 supports up to six audio/video sources. The Source Inputs are located at the back panel. Connect each source output using quality RCA signal cables. Connect the Video, and the Left and Right Audio outputs from each source to the corresponding inputs on the CAV6.6 controller. Label each cable with the name of the selected source and the Source Audio/Video input number located on the CAV6.6.

Source IR Connections

Each source component has a designated IR port on the back of the CAV6.6. This IR port is directly below the Source Audio/Video Input/Output Connections.

INSTALLER

MAKING CONNECTIONS

Source Audio/Video Input Connections

1.Using an IR emitter (the Russound 845.1 is recommended) attach the end of the emitter with the 1/8” plug to the IR emitter port below the source input.

2.Remove the adhesive back at the other end of the emitter and attach the emitter over the source component’s IR window.

3.In order to control this source component

with IR, the source must be selected at the key- pad receiving the command.

29