The Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version. The Diagnostics Menu also contains the update firmware procedure for updating the UNO-S1 and UNO-S2’s firmware.

To access the Diagnostics Menu, press and hold the Setup button on the right side of the keypad until “DIAGNOSTICS” appears on the display. The

INSTALLER

KEYPAD DIAGNOSTIC MENU

UNO Keypad Diagnostics Menu

menus are outlined in the diagram below.

When finished, press and release the Setup but- ton again (except for the Update Firmware where the power must be cycled).

Note: Do not change Controller ID settings in this menu. Controller ID is set in the Controller Setup menu (see Controller Setup Menu on page 57).

73

Page 73
Image 73
Russound CAV6.6 Six-Zone instruction manual UNO Keypad Diagnostics Menu