HP User Manual for Pavilion Monitors: Connect Your Speakers with MX70, MX50, and MX90

4Insert the pink microphone cable plug into the sound input connector on the back of your PC. If you have an HP Pavilion PC, the connector is marked in pink. However, on some

Pavilion PCs, the connection could be marked in yellow.

Connecting the Speakers

The monitor is designed for use with the Polk Audio speakers supplied by HP.

1Extend the cables attached to the two speakers.

2Identify the left and right speakers. You can tell which side of the monitor a speaker fits onto by observing its curvature and mounting pegs. Not all speakers have mounting pegs. If you don't have mounting pegs, skip to step 5. The side of the speaker with mounting pegs fits flush against the side of the monitor.

3Insert the pegs of the right speaker into the corresponding slots on the right side of the monitor. Push down, sliding the speaker pegs completely into the slots.

4Insert the pegs of the left speaker into the corresponding slots on the left side of the monitor. Push down, sliding the speaker pegs completely into the slots.

5Refer to your PC user’s guide for instructions on how to connect your speakers to the PC.

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors 5