Installer Menu
Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pages 20 and 21 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing.
Accessing the Installer Menu
1.Turn ON the TV.
If the Automated Installation Routine Wizard appears on the screen when you turn ON the TV, use the Up/Down arrow keys on the Installer Remote to select Exit from the Welcome screen, and press OK to exit the wizard.
xxLT670H PTC INSTALLER MENU
2. Using an Installer Remote, press MENU SETTINGS repeatedly |
|
|
|
|
|
| 000 | INSTALLER SEQ | 000 |
| |
until the |
|
|
|
|
|
in |
|
|
|
| |
|
|
|
| ||
UPN | ASIC D279 |
| |||
Installer Menu entry sequence (e.g., |
| ||||
PTC | V1.00.009 | CPU V3.17.00 |
| ||
Installer Menu. |
|
|
|
| |
|
|
|
| ||
Note: The default Installer Menu entry sequence is “9876”; |
| Typical Installer Menu |
| ||
however, if Installer Menu item 000 INSTALLER SEQUENCE |
|
|
has been modified, the entry sequence may be one of three additional options. See Installer Menu detailed descriptions for further information.
The Installer Menu opens with item 000 INSTALLER SEQ 000.
Note: If the password (entry sequence) is not entered or registered correctly, you will see the message “ENTER PASSWORD 0000” at the top of the screen instead of the Installer Menu header. Once you
Note: If the TV is not in
As part of the Installer Menu header, two
Acronym | Description |
FTG Mode via CPU | |
FTG Mode via EBL | |
LodgeNet PPV Mode | |
External MPI Control | |
|
|
18 |