Automated Installation Routine Wizard
The Automated Installation Routine Wizard will appear on the screen each time the TV is turned ON, until one of its configuration methods has been completed or the wizard is exited.
The wizard’s Welcome screen provides a selection of configuration methods: Auto or Manual options for configuring essential items for Pro:Centric operation and also an option for using a USB memory device to configure the TV for FTG Mode via CPU. This section describes each of the Automated Installation Routine Wizard options.
Welcome | Move OK |
Please select configuration method.
Pro:Centric Auto
Pro:Centric Manual
USB Configuration
Exit
Note: If it has been completed or exited and therefore does not display, the Automated Installation Routine Wizard can be
Note: If you plan to create a Master TV Setup using the procedure described on pages 14 to 17, be sure to exit the Automated Installation Routine Wizard in order to avoid setting modes that may restrict the custom setup procedure.
Note: If any of the configuration steps fails, you will see an “Incomplete” screen with an indication of the failure. You will then have the opportunity to reinitiate the current configuration process, select another configuration method (for example to select Pro:Centric Manual instead of Auto configuration), or exit the Automated Installation Routine Wizard.
Caution: Do NOT unplug the TV power cord or remove the antenna cable during any of the configuration processes, as doing so will interrupt the current step and may corrupt the configuration data.
To exit the Automated Installation Routine Wizard, use the Up/Down arrow keys on the Installer Remote to select/highlight Exit. Then, press OK.
Pro:Centric Auto Configuration
When selected, this option enables the TV to use a search algorithm to automatically determine the type of Pro:Centric network, the (RF) Data Channel, and the Pro:Centric Application Mode. The TV then looks for the Pro:Centric application and maintenance
Note: If you intend to use the Pro:Centric server for remote management only of
Use the Up/Down arrow keys on the Installer Remote to select/ highlight Pro:Centric Auto from the Automated Installation Routine Wizard Welcome screen. Then, press OK.
The Pro:Centric Auto Configuration will proceed with a series of automated steps to configure the TV for Pro:Centric operation and to download the Pro:Centric application and
When the Pro:Centric Auto Configuration is complete, the wizard exits, and the TV will turn OFF.
| Auto Configuration |
|
|
| Prev. |
|
| |
|
|
| Processing Pro:Centric Configuration. |
|
|
|
| |
|
|
| Step 2 may take up to 15 min(s). |
|
|
|
|
|
|
|
| Please wait... |
| 10% |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
| Step 1 | Detecting the type of Pro:Centric network | : | RF |
| ||
|
| : | In Progress |
| ||||
|
| Step 2 | Locating the Pro:Centric Server |
| ||||
|
| : |
|
|
|
| ||
|
| Step 3 | Determining the Pro:Centric mode | : |
|
|
|
|
|
| Step 4 | Downloading the application files |
|
|
|
| |
|
| : |
|
|
|
| ||
|
| Step 5 | Downloading the maintenance files |
|
|
|
| |
|
| : |
|
|
|
| ||
|
| Step 6 | Saving the Pro:Centric configuration |
|
|
|
|
|
Warning - Do not remove AC power or the signal cables during these steps
11 |