INSTALLER
INSTALLATION MENU
Basic Setup (cont’d.)
ii.TEMPLATE TYP – Select the template type to define what type of source compo-
(TType) | nent is being used. (This will tell the CAV 6.6 how to configure |
| the key commands and text for the source component if it is a |
| learned source.) Procedure advances to USE NUM IR? (step 7). |
b. Selected: Unassigned | The template for the selected source is cleared. (All key |
(Unasg) | assignments and other source settings will be erased.) |
| Procedure advances to SAVE CHANGES (step 10) |
c. All Other Selections: | Procedure advances to DEVICE CODE (step 4) |
4. DEVICE CODE – | Enter source component code number listed in this manual’s |
(DevCd) | Reference section. |
5. TEST IR? – | If “Yes” is selected, the CAV 6.6 sends a power command to the |
(TstIR) | source component. If “No” is selected, the procedure advances |
| to USE NUM IR? (step 7) |
6. SUCCESS? – | If the power to the source component was turned off, select |
(OK?) | “Yes” otherwise select “No.” By selecting “No” the Procedure |
| returns to DEVICE CODE (step 4) to allow selection of another |
| code number from the provided list. |
7.USE NUM IR? – (NumIR)
Indicates the source component has numeric scrolling, such as
8. | HIGHEST NUM – | Enter the highest possible number; for example, a |
| (High#) | player would have a max number of 100. |
9. | AUTO PLAY? – | “Yes” tells the CAV 6.6 to issue a PLAY command whenever the |
| (AtoPl) | source is selected for listening. This option is skipped if the |
|
| source type (COMMAND TYPE) chosen does not have a PLAY |
|
| command associated with it. |
10. SAVE CHANGES? – | Select “yes” to save changes. Procedure returns to SOURCE | |
| (Save?) | NUM to allow configuration of another source. |
KEY CONFIG (KeyCf)
Key Configuration defines
1. ZONE NUM – | Select the zone the key will be configured for. Changes are made |
(Zone#) | for that zone only; default setting is “All Zones.” |
51
