Installing the Memory

1.Align the notch on the memory-card with the tab in the system-board connector.

2.Press down on the memory module until the release tabs spring back to secure them in place.

3.Place the memory cover back into its place and tighten the screw to secure it.

4.Install:

a)back cover

b)VESA stand

c)stand cover

5.Follow the procedures in After Working Inside Your Computer.

Removing the System Board Cover

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a)stand cover

b)VESA stand

c)back cover

3.Remove the screw that secures the system board cover to the computer.

4.Lift the system board cover up to remove it from the computer.

17

Page 17
Image 17
Dell W07B owner manual Installing the Memory, Removing the System Board Cover