Schneider Electric iEM3300, iEM3200 Related topics, Instantaneous RMS measurements, DOCA0005EN-04

Communications via LonWorks			iEM3100 / iEM3200 / iEM3300 series user manual
	Network variable label	Type	Description
	nvoPh1kWh	SNVT_elec_kwh_l	Active energy import phase 1
	nvoPh2kWh	SNVT_elec_kwh_l	Active energy import phase 2
	nvoPh3kWh	SNVT_elec_kwh_l	Active energy import phase 3
	nvoPh1Wh	SNVT_elec_whr_f	Active energy import phase 1
	nvoPh2Wh	SNVT_elec_whr_f	Active energy import phase 2
	nvoPh3Wh	SNVT_elec_whr_f	Active energy import phase 3
			Active tariff
			0 = Multi Tariff feature is disabled
	nvoTariffActRate	SNVT_count	1 = rate A (tariff 1) active
			2 = rate B (tariff 2) active
			3 = rate C (tariff 3) active
			4 = rate D (tariff 4) active
	nvoTariffAkWh	SNVT_elec_kwh_l	Rate A (tariff 1) active energy import
	nvoTariffBkWh	SNVT_elec_kwh_l	Rate B (tariff 2) active energy import
	nvoTariffCkWh	SNVT_elec_kwh_l	Rate C (tariff 3) active energy import
	nvoTariffDkWh	SNVT_elec_kwh_l	Rate D (tariff 4) active energy import
	nvoTariffAWh	SNVT_elec_whr_f	Rate A (tariff 1) active energy import
	nvoTariffBWh	SNVT_elec_whr_f	Rate B (tariff 2) active energy import
	nvoTariffCWh	SNVT_elec_whr_f	Rate C (tariff 3) active energy import
	nvoTariffDWh	SNVT_elec_whr_f	Rate D (tariff 4) active energy import
	nvoInMeterAcc	SNVT_count_f	Input metering accumulation
	nvoRstEnergyDT	SNVT_time_stamp	Date and time of last energy reset

Related topics

•See “Resets” on page 68 for information on resetting values.

•See “Network propagation rate setup” on page 70 for information on variables that control the network update rate.

Instantaneous (RMS) measurements

Network variable label	Type	Description
nvoActPowerPh1	SNVT_power_f	Active power Phase 1
nvoActPowerPh2	SNVT_power_f	Active power Phase 2
nvoActPowerPh3	SNVT_power_f	Active power Phase 3
nvoActPowerSum	SNVT_power_f	Total active power
nvoRctPowerSum	SNVT_power_f	Total reactive power
nvoAppPowerSum	SNVT_power_f	Total apparent power
nvoVoltsL1N	SNVT_volt_f	Voltage L1-N
nvoVoltsL2N	SNVT_volt_f	Voltage L2-N
nvoVoltsL3N	SNVT_volt_f	Voltage L3-N
nvoVoltsLNAvg	SNVT_volt_f	Average voltage line-to-neutral
nvoVoltsL1L2	SNVT_volt_f	Voltage L1-L2
nvoVoltsL2L3	SNVT_volt_f	Voltage L2-L3
nvoVoltsL3L1	SNVT_volt_f	Voltage L3-L1
nvoVoltsLLAvg	SNVT_volt_f	Average voltage line-to-line
nvoCurrentPh1	SNVT_amp_f	Phase 1 current
nvoCurrentPh2	SNVT_amp_f	Phase 2 current
nvoCurrentPh3	SNVT_amp_f	Phase 3 current
nvoCurrentAvg	SNVT_amp_f	Average current
nvoAvgPwrFactor	SNVT_count_inc_f	Total power factor
nvoFrequency	SNVT_freq_f	Frequency

Related topics

•See “Network propagation rate setup” on page 70 for information on variables that control the network update rate.

66 DOCA0005EN-04