New Buck Corporation 74 installation instructions Installation of Close Clearance Shields Optional

Installation of Close Clearance Shields (Optional)

1.Taking close clearance side shields, hold up to side of stove leaving 1/4" gap between shield and top of stove.

2.Make reference mark in center of pre-punched hole in top & bottom of shield. Drill two

(2)3/32" holes in back of unit on each side. Insert self-tapping screws in through shield into stove.

3.Drill two (2) 3/16" holes in the sides of the stove where the shield meets the front side. Insert two (2) 3/8" self-tapping screws.

4.Next loosen two (2) top screws holding side shield at rear top. Insert pipe shield where back shield and top rear side shield meets. Tighten screws.

22