Hitachi CP-X2521WN, CP-X3021WN user manual Auto ECO Mode, ECO Ö Intelligent ECO Ö Normal

SETUP menu

Item

Description

	Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.
	ON Ù OFF
AUTO ECO MODE	• When ON is selected, the projector will always be set to Eco mode
	at start-up regardless of the ECO MODE ( below) setting. An OSD
	message “AUTO ECO MODE” will be displayed for tens of seconds
	when the projector starts with this function activated.
	Pressing the ECO button switches the setting to ECO MODE.
	ECO Ö INTELLIGENT ECO Ö NORMAL

	• When the ECO is selected, acoustic noise and screen brightness
ECO MODE	are reduced.
	• When INTELLIGENT ECO is selected, the brightness of the
	lamp changes according to the level of the input signal. The lamp
	becomes brighter when the input signal level is high and darker
	when the level is low. If dark images are projected continuously, the
	brightness of the lamp may increase to maintain its performance.
	• When AUTO ECO MODE ( above) is set to ON, the projector will
	always be set to Eco mode at start-up regardless this setting.
	Pressing the ►button displays the dialog for changing the
	INSTALLATION setting.

INSTALLATION

Use the ▲/▼ buttons to select the desired setting on the INSTALLATION dialog, and press the ENTER button of the remote control or the INPUT button of the projector to execute.

If Transition Detector is ON and the INSTALLATION status is changed, the TRANSITION DETECTOR ON alarm (77) will be displayed when the projector is restarted.

(continued on next page)

44