Hitachi CP-X3021WN, CP-X2521WN user manual Arrangement

Setting up

Arrangement (continued)

CAUTION ►Place the projector in a cool place Zith sufficient ventilation. The projector may shutdown automatically or may malfunction if its internal temperature is too high.

Using a damaged projector could result in a re and an electric shock.

•Do not place the projector in direct sunlight or near hot objects such as heaters.

•Do not place the projector where the air from an air conditioner or similar unit will blow on it directly.

•Keep a space of 30 cm or more between a side of the projector and other objects such as walls.

•Do not place the projector on carpet, cushions or bedding.

•Do not stop up, block nor cover the projector's vent holes. Do not place anything around the projector that could be sucked in or stuck to the projector's intake vents.

•Do not place the projector at places that are exposed to magnetic elds, doing so can cause the cooling fans inside the projector to malfunction.

►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause a re, an electric shock and malfunction of the projector.

•Do not place the projector near humidiers. Especially for an ultrasonic

humidier, chlorine and minerals contained in tap water are atomized and could be deposited in the projector causing image degradation or other problems.

NOTICE • Do not place the projector in a smoking area, kitchen, passageway or by the window.

•Position the projector to prevent light from directly hitting the projector's remote sensor.

•Do not place the product in a place where radio interference may be caused.

•Check and correct the setting for ALTITUDE of SERVICE in the OPTION menu according to the usage environment (57). If the projector is used with a wrong setting, it may cause damage to the projector itself or the parts inside.

•Keep heat-sensitive things away from the projector. Otherwise, they may be damaged by the heat from the projector.

9