Hitachi CP-X3021WN, CP-X2521WN user manual NETWORK menu

NETWORK menu

NETWORK menu

Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions.

Select an item using the ▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the Network Guide for details of NETWORK operation.

NOTE • To use the wireless network function of this projector, the designated USB wireless adapter that is sold as an option is required. Do not use

any extension cable or device when connecting the adapter to the projector.

•The projector does not allow both wireless and wired LAN to be connected to the same network.

•Do not set the same network address for both wireless and wired LAN.

•If you are not utilizing SNTP (3.1.8 Date/Time Settings in the Network Guide), then you must set the DATE AND TIME during the initial installation.

•The network communication control is disabled while the projector is in standby mode if the STANDBY MODE item of SETUP menu is set to SAVING. Please connect the network communication to the projector after setting the STANDBY MODE to NORMAL (45).

Item

Description

WIRELESS

SETUP

Selecting this item displays the WIRELESS SETUP menu for the wireless LAN.

Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item.

	Use the ▲/▼ buttons to select the mode of the
	network communication system. Select according
	to the settings of your computer.
	ADHOC Ù INFRASTRUCTURE
MODE	To save the setting, press the ► button.
	• When ADHOC is selected, IEEE802.11 n cannot
	be used.
	• If ADHOC is set to MODE while one of WPA-
	PSK or WPA2-PSK is selected in ENCRYPTION,
	the ENCRYPTION ( 65) setting switches to OFF
	automatically.

(continued on next page) 63