Hitachi CP-X2521WN, CP-X3021WN Auto Power, Off, Mouse Ù USB Display, USB Type B, Type B port

OPTION menu

Item

Description

	Using the ▲/▼ buttons adjusts the time to count down to
	automatically turn the projector off.
	Long (max. 99 minutes) Ù Short (min. 0 minute = DISABLE)
AUTO POWER	When the time is set to 0, the projector is not turned off automatically.
OFF	When the time is set to 1 to 99, and when the passed time with
	no-signal or an unsuitable signal reaches at the set time, the
	projector lamp will be turned off.
	If one of the projector's buttons or the remote control buttons
	is pressed or one of the commands (except get commands) is
	transmitted to the CONTROL port during the corresponding time,
	projector will not be turned off.
	Please refer to the section Turning off the power ( 20).
	Using the ▲/▼ buttons selects the function of USB TYPE B port.
	To use this function, you need to connect the USB TYPE B port of
	the projector and the type A USB port of a computer.
	MOUSE Ù USB DISPLAY
	MOUSE : The accessory remote control works as the simple mouse
	and keyboard of the computer.
	USB DISPLAY : The port works as an input port that receives image
	signals from the computer ( 89).
	• It may take several seconds to project the images from the USB
USB TYPE B	TYPE B port.
	• In the following cases, a message to notify you that USB TYPE B
	port is not available for picture input appears together with the USB
	TYPE B dialog:
	- This setting is switched to MOUSE while a picture input from the
	USB TYPE B port is projected.
	- The USB TYPE B port is selected as the picture input source while
	this setting is set to MOUSE. Select USB DISPLAY in the dialog to
	project the picture input to the USB TYPE B port. In this case, you
	cannot use the simple mouse and keyboard function. Otherwise
	select other port for picture input.

(continued on next page)

54