Hitachi CP-X3021WN, CP-X2521WN Date, Settings in the Network Guide, Wireless, Encryption

NETWORK menu

Item		Description
	Use the ▲/▼/◄/► buttons to enter the Year (last
	two digits), Month, Date, Hour and Minute.
	• When this item is set, the same item in the
	WIRED SETUP menu is overwritten with the same
	setting (	69).
DATE AND	• The projector will override this setting and retrieve
	DATE AND TIME information from the Time server
TIME
	when SNTP is enabled. ( 3.1.8 Date/Time
	Settings in the Network Guide)

•This setting will be reset if the projector is turned off while STANDBY MODE in the SETUP menu is set to SAVING (45), or when the AC power is turned off.

		Use the ▲/▼ buttons to select the channel of the
		wireless LAN to be used while MODE ( 63) is set
		to ADHOC. Select according to the settings of your
		computer.
		The channels 1 to 11 are available. To save the
		setting, press the ► button.
WIRELESS	CH	• The available channels would be various
SETUP		depending on a country. In addition, wireless
(continued)		network card might be required due to the
		standard.
		• This item can only be selected when MODE
		is set to ADHOC. When MODE is set to
		INFRASTRUCTURE, the channel is automatically
		selected.
		Use the ▲/▼ buttons to select the encryption
		method to be used.
		WPA2-PSK(AES) Ù WPA2-PSK(TKIP)
		Ú	Ú
		OFF	WPA-PSK(AES)
		Ú	Ú
	ENCRYPTION	WEP 64bitÙWEP 128bitÙWPA-PSK(TKIP)
		To save the setting, press the ► button.
		• When MODE ( 63) is set to ADHOC, either
		WPA-PSK and WPA2-PSK cannot be selected.
		• If IEEE802.11 n is used while MODE is set to
		INFRASTRUCTURE, TKIP and WEP are disabled.
		• If OFF or AES is not selected, communication will
		switch automatically to IEEE802.11 b/g.
(continued on next page)

65