NOTE: Only use the appliance for a maximum of three minutes at a time. If the appliance has been running for more than
3 minutes, leave it to cool down before you use it again.
Use of grater function
1.Make sure that the On/Off button is set to “0” (off).
2.Fit the attachment holder (16) onto the drive shaft in the middle of the plastic bowl with the attachment pin
(15)facing upwards. Make sure that it is pressed down as far as it will go.
3.Fit the grater attachment (14) on the attachment holder with the selected blade up.
o The long blade (17) is for grating or slicing foodstuffs depending on their consistency.
o The small curved blades (18) are for grating or shredding foodstuffs depending on their consistency.
4.Place the lid (13) on the appliance, and turn counterclockwise, so that the pin
(9)clicks into place in the safety lock
o Make sure that the lid fits tightly.
o NOTE: The safety lock ensures that the appliance cannot be turned on if the lid or the safety lock pins are not fitted correctly.
5.Place a bowl under the spout (21) to collect the foodstuffs as they are expelled from the appliance.
6.Insert the plug (7) in the mains socket and switch on the power.
7.Switch on the apparatus by switching the on/off button to one of the following settings:
o "CHOP" (lowest speed)
o "SLICE/SHRED" (highest speed) o "GRIND" (the appliance only runs
as long as the On/Off button is held at this setting).
8.Add foodstuffs to the appliance through the funnel (20).
o If necessary, use the tamper (12) to press foodstuffs down into the appliance.
o The tamper can also be used as a plug to keep juices from spraying out of the appliance.
9.Turn off the appliance by turning the On/Off button to “o” and remove the plug from the socket.
Wait until the blade has come to a complete stop before removing the lid.
NOTE: Only use the appliance for a maximum of three minutes at a time. If the appliance has been running for more than
3 minutes, leave it to cool down before you use it again.
Storage
•Ensure the appliance is clean and dry before storing.
•The appliance contains sharp parts
- keep out of the reach of children.
CLEANING
•Remove plug from the mains socket, and allow the appliance to cool down before cleaning it.
•The motor section must not be submerged in any form of liquid.
•NOTE: Do not put any part of this appliance in the dishwasher!
•Clean the appliance by wiping it with a damp cloth. A little detergent can be added if the appliance is heavily soiled.
•Never use a scouring pad, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as those may damage the outside surfaces of the appliance.
•The plastic bowl and attachments can be washed with ordinary soapy water.
•Be careful not to touch the sharp edges of the blades!
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363
the socket outlets in your home fit with the plug of the appliance. If the socket outlet in your home does not fit with the plug, the plug must be removed and disposed of safely as insertion of the plug into the socket is likely to cause electric hazard.
As this product is a class II appliance, the pin of BS plug for earth
connection is false.
20
