Hitachi CP-X3021WN, CP-X2521WN user manual Item, Description, Monitor Out

SETUP menu

Item Description

Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING.

NORMAL Ù SAVING

When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below:

•When SAVING is selected, the RS-232C communication control except to turn the projector on and the network function are disabled

STANDBY MODE while the projector is in the standby mode. If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE, all of the RS-232C commands are disabled (59).

•When SAVING is selected, STANDBY setting of AUDIO SOURCE (46) is invalid, and no signal is output from AUDIO OUT port in the standby mode.

•When SAVING is selected, STANDBY setting of MONITOR OUT is invalid, and no signal is output from MONITOR OUT port in the standby mode.

	While the image signal from the input port chosen in step (1) is
	projected, the image signal from the input port selected in step (2) is
	output to MONITOR OUT port.
	(1) Choose a picture input port using ▲/▼ buttons.
	Choose STANDBY to select the picture
	output in the standby mode.
	(2) Select one of the COMPUTER IN ports
	using ◄/► buttons.
	Select OFF to disable the MONITOR OUT
MONITOR OUT	port for the input port or standby mode
	chosen in the step (1).
	• You cannot select COMPUTER IN2 for COMPUTER IN1, and vice
	versa.
	• If you have changed the setting of STANDBY, it applies only to
	the current standby mode, NORMAL or SAVING, selected under
	STANDBY MODE, without changing the setting of the other mode.
	The factory settings are as follows:
	- COMPUTER IN1 for the NORMAL mode of STANDBY MODE
	- OFF for the SAVING mode of STANDBY MODE

45