Hitachi CP-X2521WN, CP-X3021WN user manual Preparation for wireless LAN connection

1. Connection to the network

1.4 Manual network connection setting - Wireless LAN -

Using the designated USB wireless adapter (option) on the projector enables the projector and computer to communicate in both the Ad-Hoc and Infrastructure

modes.

This section is intended to explain how to set up wireless LAN connection

manually.

1.4.1 Preparation for wireless LAN connection

Fig. 1.4.1.a Without an access point communication (Ad-Hoc)

Fig. 1.4.1.b With an access point communication (Infrastructure)

*Ad-Hoc is one of the wireless LAN communication methods without having access point to communicate.

*Infrastructure is one of the wireless LAN communication methods with having access point to communicate. If certain quantities of equipments are used, this mode is efcient.

If communicating with existing network, consult to your network administrator.

First, insert the USB wireless adapter into the USB TYPE A port. ( Connecting with your devices in the Operating Guide)

Then, set up the computer for wireless communication.

When the computer comes with a built-in IEEE802.11b/g/n wireless LAN device, enable it and disable other network connections. If a wireless LAN device is not built into the computer, connect an IEEE802.11b/g/n wireless LAN device and

install the device driver. For details, refer to the user's guide for the computer and wireless LAN device.

11