START AND STOP

Start and stop

WARNING!

•Never start the saw engine without the bar, chain and clutch cover (chain brake) assembled - or else the clutch can come loose and cause personal injuries.

•Always move the saw away from the fueling area before starting.

•Place the saw on clear ground and make sure that the chain is not contacting anything. Also, make sure that you have a secure footing.

•Keep people and animals well away from the working area.

WARNING!

The catalytic converter muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when handling the saw near flammable substances or vapours.

Start

Grip the front handle with your left hand and hold the saw down by putting your right foot in the rear handle. Pull the starter handle with your right hand and pull out the starter cord slowly until the starter pawls engage. Then pull sharply. Never wrap the starter cord around your hand.

Push in the choke control immediately when the engine fire and make repeated starting attemps. Immediately press and release the throttle when the engine starts. That will disengage the throttle latch.

As the chain brake is still activated the engine must return to idling speed as soon as possible by disengaging

Cold engine

STARTING:

The chain brake should be activated when starting the chain saw. Activate the chain brake by pushing the front hand guard forwards.

IGNITION; CHOKE:

Set the choke control in choke position. The stop contact will automatically be set to start position.

FAST IDLE:

Combined choke/fast idle is received when the choke is moved to choke position.

If the saw is fitted with a decompression valve (A): Press the valve to reduce the pressure in the cylinder and make starting easier. Always use the decompression valve when starting the saw. Once the saw has started the valve will automatically return to its original setting.

Warm engine

Use the same procedure as for starting cold engine but without choke. Fast idle is recived by first set the choke control in choke position, and then back again.

H

A

H

the throttle latch in order to avoid unnecessary wear on the clutch assembly.

CAUTION! Do not release the starter handle from fully pulled out position as this can cause damage on the saw.

Pull the front hand guard towards the front handle. The chain brake is now disengaged. Your saw is now ready for use.

Stop

The engine is stopped by switching off the ignition.

28 – English

Page 27 Page 29
Page 28
Image 28
Jonsered CS 2152 manual Start and Stop, Start and stop
Page 27 Page 29

CS 2152 specifications

The Jonsered CS 2152 is a powerful and versatile chainsaw designed for both professional and residential use. Known for its reliability and performance, this model packs a host of features and technologies aimed at enhancing the user experience while ensuring efficiency in cutting tasks.

At the heart of the Jonsered CS 2152 is its robust 50.2 cc engine, providing ample power to tackle various wood cutting needs ranging from light trimming to more demanding felling jobs. The engine is equipped with a reliable starter system that facilitates easy starting, minimizing the frustration that can accompany starting a chainsaw. This is further complemented by Jonsered's Smart Start technology, which reduces resistance in the starter cord by up to 40%, making it easier to start with minimal effort.

The CS 2152 incorporates an advanced air filtration system that contributes to longer service intervals and improved engine life. This system reduces the amount of dust and debris that can enter the engine, ensuring optimal performance and reducing wear over time. Additionally, the chainsaw features a powerful centrifugal air cleaning system, which keeps the filter cleaner for longer, enhancing efficiency and reducing maintenance needs.

User comfort and safety are at the forefront of the CS 2152's design. The chainsaw is equipped with an anti-vibration system that minimizes vibrations transmitted to the user's hands, reducing fatigue during prolonged use. The handle design promotes an ergonomic grip, ensuring both comfort and control when operating the chainsaw.

Safety features include a chain brake, which stops the chain instantly in case of kickback, and a throttle lock-out that prevents accidental acceleration. The chainsaw also has easy access to the chain tensioning system, allowing for quick adjustments and ensuring optimal chain performance.

With a compact design weighing approximately 5.5 kg, the Jonsered CS 2152 is lightweight and maneuverable, making it an ideal tool for both novice and experienced users. The combination of these features not only makes this chainsaw a reliable companion for various cutting tasks but also highlights Jonsered's commitment to quality, safety, and user satisfaction in power tools. Overall, the Jonsered CS 2152 is a standout choice for anyone in need of a high-performing chainsaw that balances power, comfort, and ease of use.
Top Page Image Contents