Q-Logic FC HBA CLI manual Output to a File

A

5– Non-interactive Commands Command Summary

bData Rate (QLA23xx/QLA24xx/QLE23xx/QLE24xx HBAs): 0 – 1 Gbs

1 – 2Gbs

2 – Auto

3 – 4 Gbs

cEnableBIOS option not available on 4Gb HBA.

dEnableExtendedLogging option not available on PPC64 or SPARC.

eOperation mode (QLA/QLE23xx and QLA/QLE24xx HBAs):

0 = interrupt for every I/O completion

5 = interrupt when interrupt delay timer expires

6=interrupt when interrupt delay timer expires or no active I/O

NOTE:

See the HBA Manager Index Adapter setting for QLA200/210 parameters.

5.3.23

-o

(Output to a File)

NOTES:

„The -ooption is valid only in non-interactive mode.

„This option can be used with all non-interactive mode options that have a corresponding interactive mode option (see Table 5-1). The option must be the first or last command in the command line.

„If the file already exists, new data are appended to the current file.

To output result and status messages into a file, type -o, followed by the file name. For example, to save LUN information to a file named systemLUNinfo:

#scli -l-osystemLUNinfo

Where the file name is systemLUNinfo, all messages are located in the directory indicated for the system platform:

Windows: syslog.log in the current directory

Linux: /var/log/messages

Macintosh: /var/log/system.log

Solaris: /var/adm/messages

SN0054614-00 F 5-33