Q-Logic FC HBA CLI manual # scli -q HBA Instance HBA Wwpn Target Wwpn

A

5– Non-interactive Commands Command Summary

Where:

HBA Instance = HBA number (use -g command to find) HBA WWPN = World wide port name of the HBA

all = Reports link speed for all targets on all HBAs in the system -targets = All Targets

-t all targets

To view the link speed of a specific Target attached to an HBA, type the following command:

#scli -q (<HBA Instance> <HBA WWPN> <Target WWPN>

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

Target WWPN = World wide port name of the Target

Type the following command to set the link speed of all Targets attached to one HBA or all HBA’s to the designated speed:

#scli -q (<HBA Instance> <HBA WWPN> <all>) <-targets -t ><speed>

Where:

HBA Instance = HBA number (use -g command to find) HBA WWPN = World wide port name of the HBA

all = Reports link speed for all targets on all HBAs in the system -targets= All Targets

-tall targets speed link speed (

To set the link speed of selected Target(s) attached to one HBA to the designated speed, type the following command:

#scli -q (<HBA Instance> <HBA WWPN> <all>) <Target WWPN><speed>

Where:

HBA Instance = HBA number (use -gcommand to find) HBA WWPN = World wide port name of the HBA

all = Reports link speed for all targets on all HBAs in the system Target WWPN = World wide port name of the Target

speed link speed (

SN0054614-00 F 5-37