Q-Logic FC HBA CLI manual Host Configuration, Where, To show the information for all HBAs, type

5 – Non-interactive Commands

Display System Information (Command Line Options -g, -z, and -tp)

S

NOTE:

The failover and SAN device management APIs are QLogic-specific libraries required for SANsurfer FC HBA CLI. The versions of these libraries are useful for debugging purposes.

5.2.2

Host Configuration

(Command Line Option -z)

The command line option -zshows all of the HBA’s information in a single command. The command format is:

#scli -z

The SANsurfer FC HBA CLI tool shows the information in section 5.2.1, as well as the following additional information:

„HBA General information

„HBA Vital Product Data (VPD)

„HBA Parameter Settings

„Driver Settings Information:

‰Group: Persistent

‰Group: Binding

„Devices/LUNs Information

„Selective LUNs Information

‰Boot Device Settings

To show the information for a single HBA, type the following command:

#scli -z (<HBA Instance> <HBA WWPN>)

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

To show the information for all HBAs, type:

# scli -z all

5-2 SN0054614-00 F