Q-Logic FC HBA CLI manual Appendix a XML Format

SANsurfer FC HBA CLI User’s Guide

Command Line Interface for QLogic Fibre Channel Host Bus Adapters

S

	5.3.16	-kl (Loopback Test)	5-17
	5.3.16.1	DataPattern (DP)	5-18
	5.3.16.2	DataSize (DS)	5-19
	5.3.16.3	TestCount (TC)	5-20
	5.3.16.4	Test Increment (TI)	5-20
	5.3.16.5	OnError (OE)	5-20
	5.3.16.6	Run a Loopback Test	5-21
	5.3.17	-kl (Run HBA Diagnostics Loopback Test)	5-23
	5.3.18	-kr (Run Read/Write Buffer Test)	5-23
	5.3.18.1	Run a Read/Write Buffer Test	5-24
	5.3.18.2	Run HBA Diagnostics Read-write Buffer Test	5-26
	5.3.19	-l (Display LUN Info)	5-28
	5.3.20	-ls (Display Link Status)	5-28
	5.3.21	-m (View, Enable, or Disable LUNs)	5-29
	5.3.22	-n (Set Selected HBA Parameter)	5-31
	5.3.23	-o (Output to a File)	5-33
	5.3.24	-p (Display Persistent Target Binding Info)	5-34
	5.3.25	-pa (Define Port Alias)	5-36
	5.3.26	-q (View or Set Target Link Speed)	5-36
	5.3.27	-r (Update HBA Parameters)	5-38
	5.3.28	-s (Silent Mode)	5-38
	5.3.29	-t (Display Target Information)	5-39
	5.3.30	-tb (Target Beacon On/Off)	5-39
	5.3.31	-tp (Display Host Topology)	5-40
	5.3.32	-v (Display Version)	5-40
	5.3.33	-vp (Virtual Port)	5-40
	5.3.34	-x (Output in XML Format 1)	5-41
	5.3.35	-x2 (Output in XML Format 2)	5-42
	5.3.36	-z (Display All HBA information for One or All HBAs)	5-42
Appendix A XML Format 1
A.1	Introduction		A-1
	A.1.1	Main Tag	A-1
	A.1.2	Utility Header	A-1
	A.1.3	Status Message	A-2
	A.1.4	Reboot Message	A-2
	A.1.5	Error Message	A-2
A.2	XML Format 1 Tags for Each Option		A-2
	A.2.1	Display System Information (Command Line Option -g)	A-3
	A.2.2	Display Adapter Settings (Command Line Option -c)	A-3

Page xvi SN0054614-00 F