Q-Logic FC HBA CLI manual Display LUN List, Target... /Target sequence repeats for each target

B – XML Format 2

Display System Information (Command Line Option -g)

S

scli -kr (<HBA Instance> <HBA WWPN>) [(-EX -EXCLUDE) <Target WWPN>] (<Parameter Name> <Parameter Alias>) <Parameter Value> -x2

The XML Format 2 for the read/write buffer test results is as follows:

<?xml version="value" encoding="value"?> <QLogic>

<AppName>SANsurfer FC HBA CLI</AppName> <AppVersion>vn.n.nn Build nn</AppVersion <AppXmlVersion>n.nn</AppXmlVersion>

<HBA>

<HBA Instance="value" HBAModel="value" HBAPort="value" WWNN="value" WWPN="value" />

<Target>

<WWNN> Target WWNN </WWNN> <WWPN> Target WWPN </WWPN>

<Loop ID ="value" DataMiscompare="value" LinkFailure= "value" LossOfSync="value" LossOfSignal="value" InvalidCRC="value"

Result="value" /> </Target>

</HBA>

<Status> n </Status> <Reboot> n /Reboot>

</QLogic>

The <Target>... </Target> sequence repeats for each target.

B.8.4

Display LUN List

(Command Line Option -l)

The command format is:

scli -l <HBA Instance> <HBA WWPN> -x2

The XML Format 2 for the adapter LUN list information is as follows:

<?xml version="value" encoding="value"?> <QLogic>

<AppName>SANsurfer FC HBA CLI</AppName> <AppVersion>vn.n.nn Build nn</AppVersion <AppXmlVersion>n.nn</AppXmlVersion>

<HBA>

<HBA Instance="value" HBAModel="value" HBAPort="value" WWNN="value" WWPN="value" />

<Target>

<WWNN>value</WWNN>

<WWPN>value</WWPN> <LUN ID="value"

WWULN="value"

B-14 SN0054614-00 F