Q-Logic FC HBA CLI manual Define Port Alias, View or Set Target Link Speed

5– Non-interactive Commands Command Summary

S

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

5.3.25

-pa

(Define Port Alias)

With this command you can:

„Define the port alias for a specific HBA port (1)

„Delete the port alias from a specific HBA port (2)

„View the port alias for a specific HBA port (3)

To define a port alias for the specified HBA, type:

#scli -pa (<HBA Instance> <HBA WWPN>) <alias>

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

Alias = Symbolic name you assign to the HBA port

To delete a port alias for the specified HBA port, type:

#scli -pa (<HBA Instance> <HBA WWPN>) delete

To view a port alias for the specified HBA port, type:

# scli -pa (<HBA Instance> <HBA WWPN>) view ?

5.3.26

-q

(View or Set Target Link Speed)

NOTE:

The -qoption is supported only on 4GB HBAs.

Type the following command to view the link speed of all Targets attached to one HBA or all HBA’s:

#scli -q (<HBA Instance> <HBA WWPN> <all>) [-targets -t ]

5-36 SN0054614-00 F