Q-Logic FC HBA CLI manual Display HBA Information, Command Line Option

A – XML Format 1

XML Format 1 Tags for Each Option

S

PortDownRetryCount="value"

EnableLipFulllogin="value"

LinkDownTimeout="value"

EnableTargetReset="value" LUNsPerTarget="value" />

</HBA> <Status> 0 </Status> <Reboot> 0 </Reboot>

</QLogic>

For clarity, each parameter is listed on a separate line; however, multiple parameters can be on the same line.

For multiple adapters, repeat the above sequence with the ID number (ID Number="value") of the next adapter.

A.2.3

Display HBA Information

(Command Line Option -i)

NOTE:

4G HBAs include VPD information as an option to the -Icommand.

The XML Format 1 for adapter general information is as follows:

<?xml version="1.0" encoding="ISO-8859-1"?> <QLogic>

<AppName>SANsurfer FC HBA CLI</AppName> <AppVersion>vn.nn.nn Build nn</AppVersion>

<HBA>

<GeneralInfo Port="value" Model="value" HBAID="value" HBAAlias="value" HBAPort="value" PortAlias="value" WWNN="value" WWPN="value" PortID="value" SerialNumber="value" DriverVersion="value" BIOSVersion="value" FirmwareVersion="value" TargetCount="value" PCIBus="value" PCIDevice="value" ActualConnectionMode="value" ActualDataRate="value"

A-4 SN0054614-00 F