Q-Logic FC HBA CLI manual Table E-1. Help Commands

Appendix E

Help Commands

Table E-1is an alphabetic listing of the Help commands. Unless otherwise noted, only one command line option per input file is valid. The hyphen (-) and slash (/) characters are equivalent. That is, scli -gand scli /g are both valid commands.

Table E-1uses the following variables:

	<hba instance>	HBA instance number of an HBA port.
	<hba wwpn>	World Wide Port Name of an HBA port.
		(xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxxxxxxxx).
	<target wwnn>	World Wide Node Name of a target device.
		(xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxxxxxxxx).
	<target wwpn>	World Wide Port Name of a target device.
		(xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxxxxxxxx).
	<target portid>	Port ID of a target device. (xx-xx-xxor xxxxxx).
	<target id>	ID of a target device.
	<lun id>	Logical Unit Number of a LUN.
	<address>	IP address.
		Table E-1. Help Commands
Command	Arguments		Function
Line
Action
—	[ int ]		Starts interactive mode.
–a	( <hba instance> <hba wwpn> )		Flashes the HBA port LED to locate it in the
			host. This feature is not supported on
			QLA22xx series HBAs.
–a	( <hba instance> <hba wwpn> )		Displays the current LED state on an HBA
	( view ?)		port.

SN0054614-00 F E-1