Q-Logic FC HBA CLI manual XML2 Tags for Each Option, Command format is

B – XML Format 2 Status Message

S

B.4

Status Message

Before the closing main tag </QLogic>, SANsurfer FC HBA CLI displays any returning status from the execution of the command line parameters and the error messages.

When the execution of the command line parameters is successful, the following status is displayed:

<Status> 0 </Status>

When the execution of the command line parameters fails, the following status is displayed, followed by an error message that provides additional details:

<Status> 1 </Status>

B.5

Error Message

When the execution of the command line parameters is fails an Error message appears between the Status and Reboot tags. d the system must be restarted for the change to take effect, the following message is displayed:

<ErrorMsg> "Details of the failure "</ErrorMsg>

B.6

Reboot Message

When the execution of the command line parameters is successful and the system must be restarted for the change to take effect, the following message is displayed:

<Reboot> 1 </Reboot>

When the execution of the command line parameters is successful and the system does not need to be restarted, the following message is displayed:

<Reboot> 0 </Reboot>

B.7

XML2 Tags for Each Option

The following sections describe the XML Format 2 for each command line option. In these sections, the term number refers to the adapter number displayed with the HBA general information (command line option -I).

B.7.1

Display Adapter Settings

(Command Line Option -c)

The command format is:

B-2 SN0054614-00 F