Q-Logic FC HBA CLI manual Portid All

A

E – Help Commands

Table E-1. Help Commands (Continued)

Command	Arguments	Function
Line
Action
–s	–	Suppresses the output. This option can be
		combined with other options. However, this
		option must be at the beginning or at the end
		of the command line.
–t	( <hba instance> <hba wwpn> )	Displays the information about devices (disks
		or tapes) attached to an HBA port.
–t	( <hba instance> <hba wwpn> )	Displays the information about a device (disk
	( <target wwpn> <target	or tape) attached to an HBA port.
	portid> )
–t	[ <all> ]	Displays the information about devices (disks
		or tapes) attached to all HBAs.
–tb	( <hba instance> <hba wwpn>	Locates a specific device or multiple devices in
	){ ( <target wwpn> ) } <beacon	a JBOD. This feature is supported only by
	mode>	devices within a JBOD.
–tp	—	Displays the current topology (Host view).
–topol-
ogy ]
–v	—	Shows the current version.
–vp	( <hba instance> <hba wwpn> )	Creates a virtual port with your own WWPN.
	create <vport hex>.
–vp	( <hba instance> <hba wwpn> )	Creates a virtual port with default WWPN (auto
	create auto	generate).
–vp	( <hba instance> <hba wwpn> )	Deletes a virtual port on a physical HBA port.
	delete <vport wwpn>
–vp	( <hba instance> <hba wwpn> )	Deletes all virtual port(s) on a physical HBA
	delete all	port.
–vp	( <hba instance> <hba wwpn> )	Lists a specific virtual port on a physical HBA
	list <vport wwpn>	port.
–vp	( <hba instance> <hba wwpn> )	Lists all virtual ports on a physical HBA port.
	list all

SN0054614-00 F E-7