Q-Logic FC HBA CLI Enable LIP Full Login, Link Down Timeout, Enable Target Reset, LUNs per Target

4 – Interactive Commands HBA Parameters Menu

S

This choice gives you the option to set the Port Down Retry Count to a value from 0 to 255.

4.3.1.2.15

Enable LIP Full Login

3: HBA Parameters	N: Port Number	2: Configure HBA Parameters	n. Enable LIP Full Login
This choice gives you the option to enable or disable LIP Full Login.
4.3.1.2.16
Link Down Timeout
3: HBA Parameters	N: Port Number	2: Configure HBA Parameters	n. Link Down Timeout

This choice gives you the option to set the Link Down timeout to a value from 0 to 240.

4.3.1.2.17

Enable Target Reset

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Enable Target Reset

This choice gives you the option to Enable or Disable Target Reset.

4.3.1.2.18

LUNs per Target

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. LUNs per Target

This option shows the LUNs per Target menu. From it you can select:

„0 LUN per Target

„8 LUNs per Target

„16 LUNs per Target

„32 LUNs per Target

„64 LUNs per Target

„128 LUNs per Target

„256 LUNs per Target

4.3.1.2.19

Commit Changes

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Commit changes

Choose this option to make the changes permanent.

CAUTION!

There is undo after you commit to making changes to the HBA parameters.

4-28 SN0054614-00 F