Q-Logic FC HBA CLI manual HBA Port Instance, To use Basic Configuration

4 – Interactive Commands

Target Link Speed or iiDMA Settings Menu (Command Line Option -q)

S

4.To use Basic Configuration:

a.Select the HBA.

b.Select the intelligent interleave factor from the intelligent interleave factor speed list (1 Gbps, 2 Gbps, 4 Gbps, or 8 Gbps) to all attached devices.

c.Choose one of the following options:

‰To apply the new settings to all attached devices, select Yes. The following is returned:

iiDMA settings have been saved to selected target(s) on HBA instance n.

‰To exit iiDMA Settings without making any changes, select No.

5.To use Advanced Configuration:

a.Select the HBA.

b.From the device list, select a device (disk) that is currently attached to this HBA.

c.From the intelligent interleave factor speed list, select the intelligent interleave factor (1 Gbps, 2 Gbps, 4 Gbps, or 8 Gbps) that you want to set for this device.

d.Repeat the previous step for additional devices.

e.Choose one of the following options:

‰To proceed, select Select the Apply changes to selected target(s). The following is returned:

The iiDMA settings have been saved to selected target(s).

‰To exit without making any changes, select Return to Previous Menu.

4.5.2

HBA Port Instance

5:Target Link Speed Target Link Speed Menu for HBA instance 1-n

This option shows the Target Link Speed Menu or iiDMA Settings Menu for a specific Port Instance.This menu looks like the Target List Menu shown in section 4.4.1.1. It includes a list of all targets attached to the selected port instance and specific information about each target, including:

„Target Type (for example, Disk)

‰Product Vendor

‰Product ID

4-40 SN0054614-00 F