Q-Logic FC HBA CLI manual Display Diagnostics Monitoring Info, Boot Device View Select Disable

A

5– Non-interactive Commands Command Summary

Where:

File Name = Absolute or full path name of the setup INF file or the com- pressed driver file in ZIP or EXE format. The binary image of the device driver must reside in the same absolute or full path location. For example:

scli -d c:\temp\ql2300\qlxxx.inf

5.3.5

-dm

(Display Diagnostics Monitoring Info)

This option allows you to show general or detailed Digital Diagnostic Monitoring Interface for optical transceivers.

NOTES:

„This option is supported only for QLA/QLE/QEM24xx (4GB) HBAs.

„Under Solaris, this option is disabled if you are using Linux inbox drivers (SLES 10.0/RHEL 5.0 or latest).

To show Transceiver monitoring general information, type:

#scli -dm (<HBA Instance> <HBA WWPN> <all>)general gen

To show Transceiver monitoring detailed information, type:

#scli -dm (<HBA Instance> <HBA WWPN> all)details det

Where:

HBA Instance = HBA number (use -gcommand to find) HBA WWPN = World wide port name of the HBA

all = All HBAs in the system

5.3.6

-e

(Boot Device View Select Disable)

Use the -ecommand to:

„Show the current boot-device selection for all HBAs (1).

„Show the current boot-device selection for a specific HBA (2).

„Set a target device as the boot device for an HBA (3).

„Selectable boot—The OS boots from the first target the BIOS finds (4).

„Delete the boot device from an HBA (5).

SN0054614-00 F 5-9