Q-Logic FC HBA CLI manual Table C-1. Exit Code Descriptions Interactive Mode

Appendix C

Interactive Exit Codes

To list the exit codes while running SANsurfer FC HBA CLI in interactive mode:

1.From the Main Menu, select the Help option and then press ENTER.

2.On the Help Menu, select Exit Codes and then press ENTER.

The CLI lists the exit code numbers, names, and descriptions as shown in Table C-1. (To see non-interactive error codes, see Appendix D.)

NOTE:

Exit codes are continually being updated. Although Table C-1was accurate at the time this document was written, you should check for the latest exit codes in the file, Fcscli-exicodes.txt, located in the SANsurfer FC HBA CLI installation directory.

Table C-1. Exit Code Descriptions – Interactive Mode

Return	Name	Description
Code
0	SUCCESS	Command executed with no error
1	ERROR_OPEN_FILE	Failed to open file
2	ERROR_READ_FILE	Failed to read file
3	ERROR_WRITE_FILE	Failed to write to a file
4	ERROR_CLOSE_FILE	Failed to close a file
5	ERROR_INCORRECT_FILE	Selected file is incorrect
6	ERROR_INCORRECT_FILE_SIZE	File size is incorrect
7	ERROR_UNSUPPORTED_HBA	HBA is unsupported
8	ERROR_NO_HBA	Unable to open the HBA handle
9	ERROR_UNKNOWN_HBA	HBA is unknown to SANsurfer FC HBA CLI
10	ERROR_INVALID_SSID	HBA has invalid SSDID/SSVID
11	ERROR_MISMATCH_SSID	The specified flash/NVRAM file does not
		have the SSDID/SSVID that match with the
		HBA

SN0054614-00 F C-1