Q-Logic FC HBA CLI Operation Mode, Interrupt Delay Timer, Execution Throttle, Login Retry Count

A

4 – Interactive Commands HBA Parameters Menu

4.3.1.2.9

Operation Mode

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Operation Mode

This option shows the Operation Mode Menu. From it you can select:

„Interrupt for every I/O Completion

„Interrupt when Interrupt DelayTimer expires

„Interrupt when Interrupt Delay Timer expires or no active I/O

Type the number for the Operation Mode you want and press ENTER.

4.3.1.2.10

Interrupt Delay Timer

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Interrupt Delay Timer

This choice gives you the option to set the Interrupt Delay timer to 0 to 255 seconds.

You cannot set the Interrupt Delay timer when the Operation Mode (blue) is set to Interrupt for Every I/O Completion.

4.3.1.2.11

Execution Throttle

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Execution throttle

This choice gives you the option to set the Execution Throttle to a value from1 to 65535.

4.3.1.2.12

Login Retry Count

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Login Retry Count

This choice gives you the option to set the Login Retry Count to a value from 0 to 255.

4.3.1.2.13

Enable LIP Reset

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Enable LIP Reset

This choice gives you the option to Enable or Disable LIP Reset.

4.3.1.2.14

Port Down Retry Count

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Port Down Retry Count

SN0054614-00 F 4-27