Q-Logic FC HBA CLI manual IiDMA Settings Disk, IiDMA All HBAs, Target Persistent Bindings Menu

A

4 – Interactive Commands Target Persistent Bindings Menu (Command Line Option -p)

When you select an HBA to set its link speed, the Target Link Speed Menu (Advanced) menu for a particular HBA instance appears. It shows the link speed options you can choose from. The options vary according to the HBA in use. For example:

„1 Gbps

„2 Gbps

„4Gbps

„8 Gbps

When you set a Link Speed option for a particular (target) device the Target Link Speed Menu (Advanced) for All HBAs reappears, allowing you to set the link speed for another HBA Instance.

When you have set the link speed for all the instances you want to, type the number for Apply changes to Selected Target(s) and press ENTER.

The system returns a message indicating the changes have been saved. For example:

New iiDMA setting has been saved to seleted target(s) on HBA instance 0.

4.5.4.3

iiDMA Settings – Disk

5: iiDMA Settings 1 - n: HBA Port n n: Disk n

When you select a specific disk on the HBA port, the following options are available on the iiDMA Menu (Advanced):

„1 Gps

„2 Gps

„4 Gps

4.5.5

iiDMA – All HBAs

5: iiDMA Settings n: All HBAs

When you select All HBAs to configure, the options for Basic Configuration and Advance Configuration appear on the menu. See 4.5.1 Configuring the iiDMA Settings.

4.6

Target Persistent Bindings Menu

(Command Line Option -p)

6: Target Persistent Bindings

SN0054614-00 F 4-45