Q-Logic FC HBA CLI manual Linux Installation, For SuSE Sles IA64, the command line is

A

3 – Initial Installation Installing SANsurfer FC HBA CLI

To create a response file for a silent installation of SANsurfer FC HBA CLI, enter the following:

scli-1.x.x-xx.windows.exe /r /f1"C:\Temp\install_1.iss"

To run the installation in silent mode with a log file, enter the following:

scli-1.x.x-xx.windows.exe /s /f1"C:\Temp\install_2.iss"

To run the installation in silent mode with an alternate file in a temporary directory, enter the following:

scli-1.x.x-xx.windows.exe /s /f1"C:\Temp\install_1.iss" /f2"C:\Temp\install_3.log"

NOTE:

After installing SANsurfer FC HBA CLI, you can create an uninstallation script for future use by creating a response file with a different name. For example:

scli-1.x.x-xx.windows.exe /r /f1"C:\Temp\uninstall.iss"

3.2.2

Linux Installation

To install SANsurfer FC HBA CLI on a Red Hat/SuSE Linux operating system, follow these steps:

1.Download the scli-x.xx.xx-xx.i386.rpm.gzfile (from the QLogic Web site or the FC HBA Manager CD-ROM) to your local machine. In the file name, x.xx.xx stands for the current version of SANsurfer FC HBA CLI.

2.Uncompress the file with the following command:

gunzip <file name>

3.Enter the following command to install the package: rpm -iv scli-x.xx.xx-xx.i386.rpm

NOTE:

For SuSE SLES IA64, the command line is:

rpm --iv scli-x.xx.xx-xx.ia64.rpm --nodeps

The new package is installed in the following directory:

/opt/QLogic_Corporation/SANsurferCLI

SN0054614-00 F 3-7