The displayed configuration is based on the manufacturer's SETUP DEFAULTS settings.
PNP OS Installed
Select Yes if the system operating environment is
Resources Controlled By
The Plug and Play AwardBIOS can automatically configure all the boot and Plug and
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup if you have installed a new
IRQ n Assigned to
When resources are controlled manually, assign each system interrupt as one of the following types, depending on the type of device using the interrupt:
Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific interrupt (such as IRQ4 for serial port 1).
PCI/ISA PnP Devices compliant with the Plug and Play standard, whether designed for PCI or ISA bus architecture.
DMA n Assigned to
When resources are controlled manually, assign each system DMA channel as one of the following types, depending on the type of device using the interrupt:
