Q-Logic FC HBA CLI HBA Information All HBAs, HBA Parameters Menu, HBA Information n All HBAs

A

4 – Interactive Commands HBA Parameters Menu

‰EFI Driver Version

‰Firmware Version

‰BIOS Version (Windows and Linux)

‰FCode Version (Solaris)

If the HBA does not support VPD, the following message appears:

VPD not supported on current HBA 6!

4.2.2

HBA Information (All HBAs)

2: HBA Information n: All HBAs

Depending on how many HBAs are in the host, the number to select this option varies. When you select that option, the All HBAs menu shows the HBA Information and VPD (Vital Product Data) options.

„Information

„VPD

4.2.2.1

Information

2: HBA Information n: All HBAs 3: Information

The Information menu shows the same HBA Information available from the General Information Menu. See section 4.1.3.1.

2: HBA Information n: All HBAs 3: VPD

The VPD menu shows the same Vital Product Data available from the HBA Information Menu. See section 4.2.1.4.

4.3

HBA Parameters Menu

3: HBA Parameters

The HBA Parameters command shows the HBA Parameters Menu, which is similar to the HBA Information Menu. It also includes list of all detected HBAs and their ports, as well as the options to view all HBAs and to return to the previous menu.

„HBA Model QLxnnnn

‰1. Port information

‰Port number

‰WWPN

‰Status

‰[additional port(s) as appropriate]

„Additional HBAs (as appropriate)

SN0054614-00 F 4-21