Q-Logic FC HBA CLI manual Windows Uninstall, Standard GUI Uninstall, Command Line Uninstall

A

3 – Initial Installation Uninstalling SANsurfer FC HBA CLI

3.3.1

Windows Uninstall

To uninstall SANsurfer FC HBA CLI, use either the standard GUI or command line method:

„Standard (GUI) uninstall—See section 3.3.1.1

„Command line uninstall—See section 3.3.1.2

3.3.1.1

Standard (GUI) Uninstall

To uninstall SANsurfer FC HBA CLI using the GUI, do the following steps:

1.From the Control Panel, click Add or Remove Programs.

2.Highlight SANsurfer FC HBA CLI.

3.Click Remove. No re-boot is required.

Alternately, invoke scli-1.x.x-xx.windows.exeand select the option to Remove all installed features.

3.3.1.2

Command Line Uninstall

To uninstall SANsurfer FC HBA CLI using the command line, type the following:

scli-1.x.x-x.windows.exe /uninst /s

If you created an uninstall script in section 3.2.1.2.2, you can uninstall SANsurfer FC HBA CLI in silent mode by type the following:

scli-1.x.x-x.windows.exe /s /f1”C:\Temp\uninstall.iss"

3.3.2

Linux Uninstall

To uninstall SANsurfer FC HBA CLI, go to the command line and type one of the following commands, where x.xx.xx is the current version of CLI:

rpm -e scli-x.xx.xx-xx rpm -e scli

To query for the installed SANsurfer FC HBA CLI package name, type the following text from the command line:

rpm -q scli

3.3.3

Solaris Uninstall

To uninstall SANsurfer FC HBA CLI, follow one of these procedures:

SN0054614-00 F 3-13