Boot Devices Per HBA Port, „ Wwpn | Q-Logic FC HBA CLI guide

4 – Interactive Commands

Boot Device Menu (Command Line Option -e)

S

4.8.1

HBA Port Instance

8:Boot Device 1 - m: HBA Port Instance

When you select this option, SANsurfer FC HBA CLI shows the Boot Device Settings menu for HBA Instance m. You can choose to:

Display Boot Device(s)

Configure Boot Device(s)

4.8.1.1

Boot Device(s) (Per HBA Port)

8: Boot Device n: Port Number 1: Display Boot Device(s)

When you select this option, SANsurfer FC HBA CLI shows the following information about the boot devices for this HBA Instance:

HBA Instance Number

HBA Model Number (QLAxxxx)

Port Number (on that HBA)

WWPN

Port ID

Boot Device Settings

Selectable Boot (Enabled/Disabled)

Primary Boot Port Name (WWPN) and LUN

Alternate 1 Boot Port Name and LUN

Alternate 2 Boot Port Name and LUN

Alternate 3 Boot Port Name and LUN

For example:

------------------------------------------------------------------------------

HBA Instance 0: 2200 Port 1 WWPN 21-00-00-E0-8B-03-55-7C PortID 00-00-EF

------------------------------------------------------------------------------

Boot Device Settings:

---------------------------------------

Selectable Boot: Disabled

---------------------------------------

(Primary	) Boot Port Name	LUN
00-----------------------------00-00-00-00-00-00-00		------
00-----------------------------00-00-00-00-00-00-00		0
(Alternate----------------------------1) Boot Port Name		------
(Alternate----------------------------1) Boot Port Name		LUN
00-----------------------------00-00-00-00-00-00-00		------
00-----------------------------00-00-00-00-00-00-00		0
(Alternate----------------------------2) Boot Port Name		------
(Alternate----------------------------2) Boot Port Name		LUN
----------------------------		------

4-52	SN0054614-00 F

Image 104

Q-Logic FC HBA CLI manual Boot Devices Per HBA Port, „ Wwpn

Contents

SANsurfer FC HBA CLI User’s Guide Document Revision History Changes Sections Affected Revision F Changes Added Appendix B XML Format Revision E Changes Section Following options and commands were added in Rev. E Following options and commands were changed in Rev. E SN0054614-00 F Revision D Changes Following options and commands were changed in Rev. D Page Page Table of Contents Section Interactive Commands SN0054614-00 F SN0054614-00 F Section Non-interactive Commands Appendix a XML Format Appendix B XML Format SN0054614-00 F List of Figures List of TablesPage How this Guide is Organized Product OverviewGuide Overview Documentation Conventions Topology General Information Supported QLogic HBAs Supported Operating Systems System Requirements Hardware Requirements Unsupported Features Software Requirements Features Not Available When Running ioctl Module Driver Features Not Available When Running Sysfs Inbox DriverFeatures Not Available When Running VMware Driver Technical Support Availability TrainingContact Information Support Headquarters Latin and South America Region Europe, Middle East, and Africa RegionAsia Pacific Region Preliminary Starting Interactive Mode Introduction Virtual if available Starting Non-interactive Mode Following inputs are valid for the port ID Windows Macintosh InteractiveRed Hat/SuSE Menu Description Section Option Non-interactive Mode Options Interactive Interactive Menu Terminology HBA Port Initial Installation Downloading the Installation Package Standard GUI Installation Installing SANsurfer FC HBA CLIWindows Installation Welcome Dialog Box Ready to Install the Program Dialog Box Command Line Installation Standard Command Line Installation Parameter Meaning Description Silent Command Line InstallationWindows Command Line Installation Parameters New package is installed in the following directory Linux InstallationFor SuSE Sles IA64, the command line is Solaris Installation Solaris Sparc 8, 9, 10 InstallationTo install SANsurfer FC HBA CLI, type the following Available packages appear. For example Solaris x86 9 and 10 Installation Enter Macintosh Installation Uninstalling SANsurfer FC HBA CLI For example Windows Uninstall Standard GUI UninstallCommand Line Uninstall Linux Uninstall Solaris Sparc 8, 9, and 10 Uninstall Solaris x86 8, 9, and 10 Uninstall Macintosh Uninstall Page Interactive Commands Command Line Option -g General Information MenuHost Information General Information Host Information General Information 2 Host Topology Command Line Option -tp -topologyHost Topology Display Host Topology SN0054614-00 F Here is an example HBA Seagate Command Line Option -b Command Line OptionSave As Txt File Save As XML File Command Line Option -z Save to XML File FormatGenerate Report Generate Report Per HBA Port ‰ HBA ID ‰ Wwpn ‰ HBA Part Number ‰ Port Number ‰ Size ‰ Type HBA ID SN0054614-00 F LUN LUN ID HBA Information Menu Generate Report All HBAsRefresh Command Line Option -ha HBA General Information per HBA PortHBA Information HBA Alias Command Line Option -pa HBA Port Alias Command Line Option -l and Reserved Word vpd HBA VPD Information HBA Information All HBAs InformationHBA Parameters Menu HBA Information n All HBAs Command Line Option -c# HBA Parameters Per HBA PortDisplay HBA Parameters HBA Parameters n Port Instance Configure HBA Parameters Command Line Option -n HBA Parameters Settings Nvram Parameter Name Alias Value Description Frame Size Connection OptionsData Rate Loop Reset Delay Enable HBA Port BiosEnable HBA Hard Loop ID Enable Fibre Channel Tape Support Operation Mode Interrupt Delay TimerLogin Retry Count Enable LIP Reset Enable LIP Full Login Link Down TimeoutEnable Target Reset LUNs per Target Restore Defaults Abort ChangesHBA Parameters All HBAs Choose this option to stop without making any changes Command Line Options -t and -l Target/LUN List MenuTarget/LUN Information Target/LUN List Target/LUN List Per HBA Port Per Target/LUN „ Size „ Type Per Target/All LUNsSo on All Targets Target/LUN List All HBAsIndividual Target So on. Repeats for each LUN Individual LUN „ Status Here is an example of the Target information „ LUN ID So forth Target/LUN List n Port Number All LUNs Hitachi Target Link Speed or 5 iiDMA Settings Target Link Speed or iiDMA Settings MenuCommand Line Option -q Configuring the iiDMA Settings 3lists the target link speed settings and descriptionsTarget Link Speed Settings Target Link Speed Settings Description To use Basic Configuration HBA Port Instance IiDMA Settings 1 n HBA Port n HBA Port Advanced Configuration Target Link Speed All HBAs Basic Configuration Target Link Speed All HBAs Advanced ConfigurationTarget Link Speed All HBAs Target Link Speed 2 All HBAs 4.2.1 IiDMA Settings Disk Command Line Option -pIiDMA All HBAs Target Persistent Bindings Menu Target Persistent Binding Target Persistent Bindings Per HBA PortDisplay Target Persistent Binding Target Persistent Bindings Bind Targets Target Persistent Binding FC Port Configuration Target Persistent Binding Unbind TargetsTarget Persistent Binding All HBAs Target Persistent Binding p All HBAs Command Line Option -m Target Persistent Binding Bind TargetsSelective LUNs Menu Selective LUNs Per HBA Port Selective LUNs 1 All HBAs Display LUN ConfigurationSelective LUNs All HBAs Manual Configure LUNs Auto Configure LUNsBoot Device Menu Command Line Option -e Boot Devices Per HBA Port „ Wwpn LUN List Menu Configure Boot DevicesBoot Device Settings Save Configuration Boot Devices All HBAsDriver Settings Menu Command Line Option -fg Driver Settings Parameter Name Alias Value Description Param name Flash Update Per HBA Port or All HBAs Command Line Option -b and Reserved Word saveUtilities Menu Flash Save Per HBA Port HBA Parameters Template Per HBA or All HBAs HBA Parameters Update Per HBA Port or All HBAsHBA Parameters Save Per HBA Port Using HBA Parameter Templates Setting QLogic IBM SUN Driver Update Command Line Option -dCommand Line Option -rs Driver Rescan Command Line Option -a Command Line Option -tbBeacon Menu Locate HBA HBA Beacon Diagnostics Menu Command Line Options -kl, -kr, and -dmHBA Diagnostics Configuration Settings Beacon Selected Targets Diagnostics n Port Number Diagnostics Loopback TestCommand Line Option -kl Configure Loopback Test Parameters SN0054614-00 F Diagnostics Read/Write Buffer Test Run Loopback Test Configure Read/Write Test Parameters SN0054614-00 F SN0054614-00 F SN0054614-00 F Run Read/Write Buffer Test Transceiver Details General Diagnostics Transceiver Details DMICommand Line Option -dm Transceiver Details Details SN0054614-00 F SN0054614-00 F Configuration Command Line Options -gs and -lsCommand Line Option -gs Statistics Menu Resetting to default settings..., done 10. HBA Port Statistics Options Current SettingsAuto Poll Show HBA Statistics Set RateLog to File Command Line Option -ls Link Status Restore Default Auto Poll Menu11. Statistics/Link Status Options SANsurfer FC HBA CLI displays two polling options Show Link Status Virtual Menu Command Line Option -vpVirtual Menu Scli -vp -h Virtual Virtual Menu for HBA InstanceList Virtual Ports ‰ Status Online or Loop Down Here is an example Delete Virtual PortsCreate Virtual Ports Command Line Option -h Auto GenerateUser Generate Help Menu About ContentsExit Codes Display System Information Command Line Options -g, -z, and -tpCommand format to show host information is To show the information for all HBAs, type Host ConfigurationWhere Command Line Option -tp Options Shown by -z Description See Section Command Summary Command format for non-interactive mode is„ -s= Silent mode see .3.28. For example Only 2defines the command variables Command VariablesView or Toggle Beacon Status Variable Definition Format To start or stop flashing the HBA’s LED beacon, type Save or Update the Flash Bios or FcodeTo view the HBA port’s LED Beacon state, type Show Parameter Settings Update Device DriverTo save the BIOS/FCode to a file, type To show the parameter settings for a specific HBA, type To show Transceiver monitoring detailed information, type Display Diagnostics Monitoring InfoBoot Device View Select Disable These commands To view the current boot device selection on all HBAs To disable delete the boot device for a specific HBA, type Input Parameter Options from a Text File List SANsurfer FC HBA CLI Error CodesSANsurfer FC HBA CLI specifies command line input from file Show Driver Settings Configure Driver SettingsType the following command to configure the driver settings 3lists the driver configuration parameter names and aliases For details of this command, see section Display System InformationShow HBA Statistics To view system information, type Help HBA Statistics ParametersType the following text to view the help file For example, typing scli -l-hshows Set Delete HBA Alias To do a loopback test with customized parameters, type Loopback TestTo show general or VPD information for a specific HBA, type DataPattern DP For the loopback test, the data pattern is eitherTo enter a customized value in the range of 00-FF, type 5lists all valid data patterns DataSize DS Data Pattern ValuesFor the loopback test, the data size is either Hex Binary OnError OE For the loopback test, OnError is eitherTestCount TC Test Increment TI OnError Values Driver Versions Not Requiring a Loopback ConnectorTo do a loopback test using the current parameters, type Run a Loopback Test To do a loopback test with custom parameters, type An example of a successful loopback test follows To do a read/write test with customized parameters, type Run HBA Diagnostics Loopback TestRun Read/Write Buffer Test Run a Read/Write Buffer Test HBA Wwpn An example of a successful read/write buffer test follows Name Alias Value Description Run HBA Diagnostics Read-write Buffer TestDiagnostics Parameters Data Pattern DP Test Patterns „ Status To view the link status, type Display LUN InfoDisplay Link Status View, Enable, or Disable LUNs 10. Link Status Parameters To view the current select state of a specific LUN, type To view all selective LUNs for all HBA ports, typeTo view an HBA’s selective LUN list, type To enable select all LUNs of all targets on a specific HBA To restore the default Bios 4G HBAs only, typeSet Selected HBA Parameter To set a specific parameter on a specific HBA, type 11lists the HBA parameter names and aliases 11. HBA Parameters Output to a File Display Persistent Target Binding Info To show persistent binding information for all HBAs, type To bind a selected target to a specific HBA, type To unbind a specific target, type Define Port Alias View or Set Target Link SpeedTo delete a port alias for the specified HBA port, type To view a port alias for the specified HBA port, type # scli -q HBA Instance HBA Wwpn Target Wwpn Update HBA Parameters Silent ModeTo update the HBA Parameters, type To save the HBA parameters to a file, type Display Target Information Target Beacon On/Off Display Host Topology Display VersionVirtual Port System shows the following information To create a virtual port with a specific WWPN, type Output in XML FormatTo create a virtual port with an automatic WWPN, type 2 covers this command Display All HBA information for One or All HBAs Main Tag Utility Header Reboot Message Error MessageStatus Message XML Format 1 Tags for Each Option Display Adapter Settings Command Line Option -cXML Format 1 for adapter settings information is as follows XML format 1 for system information output is as follows Display HBA Information Here is the information for the 4G HBAs Here is the VPD information Command Line Option -t Display Device ListXML Format 1 for adapter device information is as follows Target…/Target sequence is repeated for each HBA target Target Persistent Binding Command Line Option -lDisplay LUN List Selective LUNs Boot DeviceXML Format 1 for the boot device information is as follows Diagnostics Results -Loopback Test Diagnostics Results Read/Write Buffer TestCommand Line Option -kr XML Format 1 for the loopback test results is as follows View Driver Settings Display All Information for One or All HBAsTable A-1. Options Displayed by -z Non-interactive Description Section Option XML Format 1 for all adapter information is as follows XML Format XML Format 1 Tags for Each Option Link Statistics HBA StatisticsXML Format 1 for the link statistics option is as follows XML Format 1 for the HBA statistics option is as follows XML Format 1 for the HBA alias option is as follows XML Format 1 for the HBA port alias option is as follows SFF DMI XML Format 1 for SFF DMI general information is as follows XML Format XML Format 1 Tags for Each Option XML Format 1 XML Format 1 Tags for Each Option XML Format XML Format 1 Tags for Each Option XML Format 1 XML Format 1 Tags for Each Option Host Topology XML Format 1 XML Format 1 Tags for Each Option InterConnectElement Status 0 /Status Reboot 0 /Reboot QLogic Appendix B Command format is XML2 Tags for Each Option XML Format 2 for adapter settings information is as follows XML Format 2 for SFF DMI general information is as follows XML Format 2 for the boot device information is as follows XML Format 2 for SFF DMI detailed information is as follows XML Format XML2 Tags for Each Option XML Format 2 XML2 Tags for Each Option Command format for all HBAs is Command format for a single HBAs is HBA Instance HBA Wwpn view ? XML Format 2 for system information output is as follows XML Format 2 for adapter general information is as follows XML Format 2 for 4G HBAs is as follows Diagnostics Results Loopback Test XML Format 2 for the loopback test results is as follows Target... /Target sequence repeats for each target Scli -m all view ? XML Format 2 for adapter device information is as follows XML Format 2 for all adapter information is as follows Non-interactive Setting Section OptionTable B-1. Options Displayed by -z XML Format Display System Information Command Line Option -g SN0054614-00 F XML Format 2 for the link statistics option is as follows View HBA Alias LinkStatus…/ parameter repeats for each linkXML Format 2 for the HBA statistics option is as follows Statistics.../ sequence repeats for each HBA XML Format 2 for the HBA port alias option is as follows SN0054614-00 F Scli -tp SN0054614-00 F Page Table C-1. Exit Code Descriptions Interactive Mode Return Name Description Code Errormismatchchecksum Errorflashupdatenoregion Errorinvalidparamsettings Errorpreservenvramdata Errorduplicatetargetid Errorfailoverdriverloaded Errorclosezipfile Errorsavesellunconfig Errormissingipaddress Errorsavetargetiidmasettings Erroradapterpropmissing Code Name Description Table D-1. Error Code Descriptions Non-interactive ModeTo see the interactive exit codes, see Appendix C Errorflashupdatenovalidregion Errordiagnosticsdatamiscompare Errormissingnvramtemplatefile Errorbootconfigdisableddriver Errorreadfrompersistentstorage Errorinualidhbawwid Driver sys file is missing in the driver Failed to save selective LUN configu 205 Reserved Not used 206 207 208 209 210 Errorsettargetiidmaunsupported 257 Reserved Not used 258 259 260 Table E-1. Help Commands Command Arguments Function All file name Disable prim alt1 alt2 Param name param Alias param value Hba instance hba wwpn Lun id view ? Hba instance hba wwpn Target portid target id Hba instance hba wwpn Portid All Writes the output in XML format 1. Option Comma separated values CSV file For the HBA and initializing and testing the HBAs ISPSee HBA Driver Red Hat/SuSE Linux, the driver layers include Fabric consists of cross-connected FC devices and switches QLogic Fast!UTIL FC HBA Bios utilityPort in a fabric where an NPort can attach Flash Prom contains the Bios code for the HBA NPort ID Virtualization As opposed to a SAN. See SAN Storage Area NetworkDevice’s Alpa on the loop Also FC-P2P. Two FC nodes directly connected not in a loop Remote procedure call developed by Sun MicrosystemsNetwork Interface Controller SAN Storage Area Network Index Index-2 SN0054614-00 F SN0054614-00 F Index-3 Fg4-54,5-4,5-13,A-10,B-10 file Txt Xml 4-8 text 4-8 XML HBA hard loop ID 4-23host LED SN0054614-00 F Index-7 Index-8 SN0054614-00 F Definition of Glossary-6 layers, definition of Glossary-2 SDM API Index-10 SN0054614-00 F Txt 4-8 text file XML