Q-Logic FC HBA CLI Silent Command Line Installation, Windows Command Line Installation Parameters

3 – Initial Installation

Installing SANsurfer FC HBA CLI

S

By default, SANsurfer FC HBA CLI is installed in the following directory:

Program files\QLogic Corporation\SANsurferCLI

If you want to change the default location, enter the directory in the command line; for example:

scli-1.x.x-xx.windows.exe installdir="c:\sansurfercli"

3.2.1.2.2

Silent Command Line Installation

The command for a silent installation is the same as for a standard installation (see section 3.2.1.2.1), with the addition of the command parameters listed in Table 3-2. Examples using these parameters follow the table.

Table 3-2. Windows Command Line Installation Parameters

Parameter	Meaning	Description
/r	Record modea	To run the SANsurfer FC HBA CLI installation package in
		silent mode, first run scli-1.x.x-xx.windows.exewith
		the /r parameter to generate a response file, which stores
		information about the data entered and options selected at
		run time. By default, the response file is created inside the
		system's Windows folder. To specify an alternative response
		file name and location, use the /f1 parameter.
/s	Silent mode	For an InstallScript MSI or InstallScript project, the command
		scli-1.x.x-xx.windows.exe /s runs the installation in
		silent mode, based on the responses contained in the
		Setup.iss file, located in the same directory. (Response files
		are created by running Setup.exe with the /r option). To
		specify an alternative file name or location of the response
		file, use the /f1 parameter.
/f1	Specify alternative	This parameter allows you to specify the name and location
	response file namea	of the response file.
		The /f1 parameter is available when creating a response
		file (with the /r option) and when using a response file (with
		the /s option).
/f2	Specify alternative log	When running an InstallScript MSI or InstallScript installation
	file namea	in silent mode (using the /s parameter), the log file
		Setup.log is created in the same directory and with the same
		name (except for the extension) as the response file. The
		/f2 parameter allows you to specify an alternative log file
		location and file name.

aInstallScript and InstallScript MSI projects only.

3-6 SN0054614-00 F