INSTALLATION
Installing Logs (Cont.)
17
INSTALLATION
Continued
5.For CCL3924PT and CCL3930PTA Only: Locate pin and hole on the bottom of crossover log (#5). Slide the pin into the hole located in crossover log (#4). Slide the hole onto the pin on front log (#1). See Figure 32.
For CCL3018P and CCL3018PT Only: Locate holes on the bot- tom of crossover log (#5). Slide the holes over the left pins on middle log (#2) and front log (#1). See Figure 33.
6.Locate holes on the bottom of crossover log (#6). Slide these holes onto the right pins located in middle log (#2) and front log (#1). See Figure 34.
7.For CCL3930PTA only: Locate holes on the bottom of cross- over log (#7). Slide onto the pins located in crossover log (#6) and middle log (#2). See Figure 35.
8.Add lava rock around base of heater if desired. Do not place any lava rock on logs or burner.
Crossover Log (#4)
Front Log (#1)
Figure 32 - Installing Crossover Log (#5)
(CCL3930PTA Shown)
Crossover
Log (#4)
Front Log (#1)
Figure 33 - Installing Crossover Log (#5)
(CCL3018P and CCL3018PT Only)
6
Pins
Log #2
Front Log (#1)
Figure 34 - Installing Crossover Log (#6)
(CCL3930PTA Shown)
Holes
7
Crossover
Log (#6)
Middle
Log (#2)
Pins
Figure 35 - Installing Crossover Log (#7) (Model CCL3930PTA Only)
For more
visit www.
.com
