Desa CGD3018PT, CRL2718P, CRL3124P Installation, Continued, Dual Burner Biltmore Split Oak Models

Models: CCL3018PT CGD3924PT CGD3930P CGD3930PT CCL3924P CCL3924PT CCL3930PTA CGD3018PT CGD3924P CCL3018P CRL3124P CRL2718P

1 44
Download 44 pages 1.86 Kb
Page 16
Image 16
Dual Burner Biltmore Split Oak Models

16

INSTALLATION

Installing Logs (Cont.)

INSTALLATION

Continued

Dual Burner Biltmore Split Oak Models

Manual background WARNING: Failure to position the parts in accor- dance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

Manual backgroundCAUTION: After installation and periodically there- after, check to ensure that no flame comes in contact with any log. With the heater set to HI, check to see if flames contact any log. If so, reposition logs accord- ing to the log installation instructions in this manual. Flames contacting logs will create soot.

Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

Middle Log (#2)

Burner

Tab

U-Shaped Slot

Figure 29 - Installing Middle Log (#2) (CCL3930PTA Shown)

Pins

1.Place the front log (#1) on the grate fingers. Make sure the front log rests firmly between the grate fingers and the grate base (see Figure 28).

2.Place the base of the middle log (#2) in the U-shaped slots of the grate base. The cutout on the right of the middle log should fit over the burner (see Figure 29). Make sure the front of the middle log is resting on the tabs of the grate base.

3.Locate pins on the bottom of back log (#3). Slide these pins into the holes in the grate base behind the burner (see Figure 30).

4.Locate holes on the bottom of crossover log (#4). Slide front hole onto the left pin (CCL3924PT or CCL3930PTA) or middle pin (CCL3018P or CCL3018PT) on the middle log (#2) and the pin on the back log (#3). See Figure 31 for placement.

Front Log (#1)

Grate

Fingers

Grate Base

Figure 28 - Installing Front Log (#1) (CCL3930PTA Shown)

Hole in Grate

Manual background Base

Manual backgroundBurner

Figure 30 - Installing Rear Log (#3) (CCL3930PTA Shown)

Pins

Log #4

 

Log #2

Log #3

Figure 31 - Installing Crossover Log (#4) (CCL3930PTA Shown)

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundForManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background.Manual backgroundManual backgroundManual backgroundManual background.comManual backgroundManual backgroundManual backgroundManual backgroundManual background

107124-01E

Page 16
Image 16
Desa CGD3018PT, CRL2718P, CRL3124P, CCL3018P, CGD3924P Installation, Continued, Dual Burner Biltmore Split Oak Models