Q-Logic FC HBA CLI manual SN0054614-00 F

SANsurfer FC HBA CLI User’s Guide

Command Line Interface for QLogic Fibre Channel Host Bus Adapters

S

Configure HBA Settings (-n): added option to restore the BIOS (QLA/QLE/QEM24xx HBAs).

Selective LUNs (command line option -m): added ALL option to command line to view all selective LUNs for all HBA ports.

Set Boot Device (-e): removed references to OSs from the third paragraph; this command now applies to all OSs.

Diagnostics (command line options -kl and -dr): DataPattern (DP) parameter: added CRPAT, CSPAT, and CJTPAT.

DataSize (DS) parameter: added 128-byte value for read/write buffer test. Added 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65535 byte values for loopback test. Added default val- ues.

TestCount (TC) parameter: changed the number of loopback tests that can be run from 0–10000 to 0–65535.

TestIncrement (TI) parameter: increased test incre- ment for the loopback test from 1–10000 to 1–65535.

Output in XML Format (command line option -x): Added XML format for HBA alias (command line option -ha).

Added XML format for HBA port alias (command line option -pa).

Added XML format for SFF DMI (command line option -dm).

Added XML format for host topology (command line option -tp).

Target Persistent Binding (command line option

-p): added ALL parameter to show target persistent binding information for all HBA ports.

4.7.1, Section 5.3.22

4.8.1.2, Section 5.3.21

4.9.2.1.1

4.17.1.2.1, 5.3.17

4.17.1.2.2, Table 5-5

4.17.1.2.3, Table 5-5

4.17.1.2.4, Table 5-5

Section 5.3.34

Section 5.3.14

Section 5.3.25

Section 5.3.5

Section 5.3.31

Section 5.3.24

Page vi SN0054614-00 F