Q-Logic FC HBA CLI HBA Parameters Per HBA Port, Display HBA Parameters, Command Line Option -c#

4 – Interactive Commands HBA Parameters Menu

S

„All HBAs

Here is an example of an HBA Information Menu screen. In this example, the host includes three HBAs with two ports each and one HBA with a single port:

HBA Model QLA2342:

1.Port 1 WWPN 21-00-00-EO-8B-01-43-9B Online

2.Port 2 WWPN 21-01-00-E0-8B-21-43-9B Online HBA Model QLA2300:

3.Port 1 WWPN 21-00-00-E0-8B-05-CB-D8 Loop down

4.Port 2 WWPN 21-01-00-E0-8B-25-CB-D8 Online HBA Model QLA2462:

5.Port 1 WWPN 21-00-00-E0-8B-1P-9D-P0 Online

6.Port 2 WWPN 21-01-00-E0-8B-3P-9D-P0 Loop down HBA Model QLA21O:

7.Port 1 WiIPN 21-00-00-E0-8B-1A-3F-E0 Online

8.All HBAs

9.Return to Previous Menu

Enter the number to select the HBA you want to configure or All HBAs.

4.3.1

HBA Parameters (Per HBA Port)

3: HBA Parameters n: Port Instance

The HBA Instance menu has the following options:

„Display HBA Parameters

„Configure HBA Parameters

„Restore Defaults (4Gb and 8Gb HBAs only)

„Return to Previous Menu

4.3.1.1

Display HBA Parameters

(Command Line Option -c#)

3: HBA Parameters n: Port Instance 1: Display HBA Parameters

When you select this option, the following parameters appear:

„Connection Options

„Data Rate (QLA23xx, QLA24xx, QLE23xx, and QLE24xx HBAs)

„Frame Size

„Hard Loop ID

„Loop Reset Delay (seconds)

„Enable Host HBA BIOS

„Enable Hard Loop ID

„Enable FC Tape Support

„Operation Mode

„Interrupt Delay Timer (100 ms)

4-22 SN0054614-00 F